About Us
10+ years. 500+ engineers and technicians. One mission: deliver PCB and PCBA that exceed expectations.
Our Story
Founded in the heart of Shenzhen's electronics manufacturing hub, Huaxing PCBA has grown from a small PCB prototyping shop to a full-spectrum electronics manufacturing partner serving clients across 30+ countries.
We invest continuously in the latest equipment — Yamaha and ASM placement machines, automated optical inspection, and in-circuit testing — to ensure every board that leaves our floor meets the highest standards.
Our 15,000㎡ facility in Bao'an houses PCB fabrication, SMT assembly, DIP lines, and box-build integration under one roof. No outsourcing. No delays. Complete control.
Quality Control
Three-stage quality gate. 100% AOI and electrical test. Zero defects is the only acceptable target.
Incoming material inspection. Every laminate, component reel, and chemical batch verified before production.
In-process checks at every critical stage — drilling, plating, etching, lamination, solder mask, and surface finish.
Final outgoing inspection. AOI (100%), flying probe / test fixture, X-Ray for BGAs, impedance TDR, thermal shock sampling.
Certifications
Quality management system certified. Process-driven manufacturing with continuous improvement metrics.
European Conformity. Products meet EU safety, health, and environmental protection requirements for the European market.
Full compliance with EU hazardous substance restrictions. Documentation available for every order.
Automotive quality management. PPAP Level 3. FMEA-driven process control. Full traceability.
Environmental management system. Waste treatment and sustainable manufacturing practices.
All assemblies built and inspected to IPC-A-610 acceptability standards. Class 3 for high-reliability applications.
Production Lines
| Line | Equipment | Capacity |
|---|---|---|
| SMT Line 1–4 | ASM Siplace SX2 / Yamaha YSM20R | 45,000 CPH per line |
| SMT Line 5–8 | Yamaha YSM20R + YSM10 | 38,000 CPH per line |
| SPI (All Lines) | Koh Young aSPIre3 | Inline, post-print |
| Reflow (All Lines) | Heller 1913 Mk5 / BTU Pyramax | 12-zone, N₂ capable |
| AOI (All Lines) | Koh Young Zenith / Omron VT-S1080 | Pre & Post-reflow |
| X-Ray | Nikon XT V 160 / Dage Quadra 5 | BGA/QFN/LGA inspection |
| DIP Lines 1–4 | SEHO / Ersa wave solder | Lead-free, N₂ |
| Conformal Coating | PVA selective coating system | Acrylic/Silicone/Urethane |
| Testing | Agilent 3070 ICT / Custom FCT | Per customer specification |
Partner with a manufacturer that treats your project like its own. Send us your requirements today.
Upload Gerber + BOM — 24h quote with free DFM review.